Detailed Product Description

this circuit breaker is used to protect the electrical distribution system and electrical devices against short-circuit(if the defect has been caused by failure or incorrect connection) and to protect the electrical distribution system against overload(if the circuit has not been damaged but an extreme thermal overload occurred which could damage the wiring).
 this circuit breaker is especially suitable  for common installation with switchboards and switching points of low-voltage end circuits. It is designed mainly for alternating current but they can  also be used  for direct current for which the reduction of short-circuit resistance by approx. about 20% has to be taken into account (because of a higher stress of contacts).
 The circuit breaker is manufactured in accordance with a particular european standard EN60898, they are able to comply with any design requirements for arrangement of MCBs with regard to the selectivity and requirements for individual characteristics B, C and D.
 and the circuit breaker can be mutually interconnected by means of single-pole to four-poles interconnecting forked and reed(rack) strips.
More advantages for users in latter pages.